 |
| OEM: | |
|---|---|
| Quantity: | |
Common rail diesel injector
injectors for Bosch
0445110 series excavator
for replace/repair
0445110489 0445110565 0445110566
10 pieces
We supply a comprehensive range of high-pressure common rail fuel injectors For Bosch from the 0445110 and 0445120 series, covering all major OEM part numbers including 0445110018, 0445110009 to 0445110966, and 0445120006 to 0445120472 variants.
FAQ
Q1: How to request technical documents?
Provide:
Injector serial number (12-digit on side)
Engine ECU software version
Current fuel rail pressure reading
Q2: Can I replace a single injector, or should I change the full set?
A: While single replacement is possible, we recommend replacing all injectors if mileage exceeds 150,000 km to ensure balanced performance and avoid uneven wear.
Q3：Nozzle type comparison?
A: Bosch: 7-hole symmetrical (better cold starts)
Delphi: 8-hole staggered (lower emissions)
Q4: What's the expected service life?
A: Typically 150,000-200,000 km with proper maintenance:
Regular fuel filter changes (every 30,000 km)
Using recommended diesel additives
Avoiding water contamination
Q5: Can I mix Bosch and Delphi injectors?
A: Never. Always use matched sets.
Q6:Q: Are 0445110 and 0986435 series interchangeable?
A: Absolutely not. Critical differences:
Solenoid resistance (Bosch 0.8Ω vs Delphi 1.2Ω)
Calibration protocols (EDC17 vs DCM3.5)
Q7: Q: Warranty claim process?
A: 1.Submit injector photos showing serials
2.Provide scan tool data (adaptation values)
3.Include failed part's fuel contamination test
We supply a comprehensive range of high-pressure common rail fuel injectors For Bosch from the 0445110 and 0445120 series, covering all major OEM part numbers including 0445110018, 0445110009 to 0445110966, and 0445120006 to 0445120472 variants.
FAQ
Q1: How to request technical documents?
Provide:
Injector serial number (12-digit on side)
Engine ECU software version
Current fuel rail pressure reading
Q2: Can I replace a single injector, or should I change the full set?
A: While single replacement is possible, we recommend replacing all injectors if mileage exceeds 150,000 km to ensure balanced performance and avoid uneven wear.
Q3：Nozzle type comparison?
A: Bosch: 7-hole symmetrical (better cold starts)
Delphi: 8-hole staggered (lower emissions)
Q4: What's the expected service life?
A: Typically 150,000-200,000 km with proper maintenance:
Regular fuel filter changes (every 30,000 km)
Using recommended diesel additives
Avoiding water contamination
Q5: Can I mix Bosch and Delphi injectors?
A: Never. Always use matched sets.
Q6:Q: Are 0445110 and 0986435 series interchangeable?
A: Absolutely not. Critical differences:
Solenoid resistance (Bosch 0.8Ω vs Delphi 1.2Ω)
Calibration protocols (EDC17 vs DCM3.5)
Q7: Q: Warranty claim process?
A: 1.Submit injector photos showing serials
2.Provide scan tool data (adaptation values)
3.Include failed part's fuel contamination test
