 |
| OEM: | |
|---|---|
| Quantity: | |
Common rail diesel injector
injectors for Bosch
0445110 series excavator
for replace/repair
0445110294 0445110295 0445110619 0445110162 0445110163 0445110176 0445110177 0445110191 0445110192 0445110193 0445110194 0445110263 0445110264 044511
10 pieces
We supply a comprehensive range of high-pressure common rail fuel injectors from the Bosch 0445110 and 0445120 series, covering all major OEM part numbers including 0445110018, 0445110009 to 0445110966, and 0445120006 to 0445120472 variants.
FAQ
Q1: How to request technical documents?
Provide:
Injector serial number (12-digit on side)
Engine ECU software version
Current fuel rail pressure reading
Q2: Can I replace a single injector, or should I change the full set?
A: While single replacement is possible, we recommend replacing all injectors if mileage exceeds 150,000 km to ensure balanced performance and avoid uneven wear.
Q3：Nozzle type comparison?
A: Bosch: 7-hole symmetrical (better cold starts)
Delphi: 8-hole staggered (lower emissions)
Q4: What's the expected service life?
A: Typically 150,000-200,000 km with proper maintenance:
Regular fuel filter changes (every 30,000 km)
Using recommended diesel additives
Avoiding water contamination
Q5: Can I mix Bosch and Delphi injectors?
A: Never. Always use matched sets.
Q6: What’s the difference between OEM and aftermarket injectors?
A：OEM injectors are made by the original manufacturer, while ours are high-performance
Q7: How often should fuel injectors be replaced?
A: Typically, every 50,000–100,000 miles, but this depends on driving conditions and fuel quality.
A: If you have basic mechanical knowledge, you can install them yourself using standard tools. However, for optimal performance, professional installation is recommended.
We supply a comprehensive range of high-pressure common rail fuel injectors from the Bosch 0445110 and 0445120 series, covering all major OEM part numbers including 0445110018, 0445110009 to 0445110966, and 0445120006 to 0445120472 variants.
FAQ
Q1: How to request technical documents?
Provide:
Injector serial number (12-digit on side)
Engine ECU software version
Current fuel rail pressure reading
Q2: Can I replace a single injector, or should I change the full set?
A: While single replacement is possible, we recommend replacing all injectors if mileage exceeds 150,000 km to ensure balanced performance and avoid uneven wear.
Q3：Nozzle type comparison?
A: Bosch: 7-hole symmetrical (better cold starts)
Delphi: 8-hole staggered (lower emissions)
Q4: What's the expected service life?
A: Typically 150,000-200,000 km with proper maintenance:
Regular fuel filter changes (every 30,000 km)
Using recommended diesel additives
Avoiding water contamination
Q5: Can I mix Bosch and Delphi injectors?
A: Never. Always use matched sets.
Q6: What’s the difference between OEM and aftermarket injectors?
A：OEM injectors are made by the original manufacturer, while ours are high-performance
Q7: How often should fuel injectors be replaced?
A: Typically, every 50,000–100,000 miles, but this depends on driving conditions and fuel quality.
A: If you have basic mechanical knowledge, you can install them yourself using standard tools. However, for optimal performance, professional installation is recommended.
