The high pressure fuel pipe assembly of the diesel engine is a high pressure pipeline for the high pressure fuel pump to deliver high pressure fuel to the high pressure fuel nozzle. When the diesel engine is in operation, the high pressure fuel pipe assembly is subjected to the heavy impact load of the high pressure fuel and the additional load generated by the vibration of the diesel engine. Therefore, the high pressure fuel pipe assembly connected to the high pressure fuel pump and the high pressure fuel nozzle must have sufficient pressure resistance and the ability to lock, anti-vibrate and prevent leakage.
If you want to buy a fuel line pipe for your vehicle, what you need is a fuel line with long lasting performance. They are built for consistency as well as to keep the gas flowing to your engine. We find that many customers are curious about our products. That's why we've collected some common topics in the following article.
Fuel hoses have many different positions on a car. In older vehicles, there are rims from the tank to the carburetor or injector of the fuel system. Some older vehicles have short fuel hoses connecting steel wires to fuel pumps, fuel tanks and carburetors. Over time, these hoses tend to weaken and crack, causing gasoline or diesel to leak.
A fuel line pipe is a flexible hose used to transport fuel from one point of a vehicle to another, or from a storage tank to a vehicle. Another definition given is: fuel line pipes are hoses or tubing for holding liquid fuel or fuel vapor. This includes all hoses or pipes for refueling ports, connecting dual tanks and connecting carbon tanks to tanks. This does not include hoses or pipes routing crankcase steam into the engine inlet or any other hoses or pipes that are open to the atmosphere. It is usually made of reinforced rubber to prevent splitting and kinking. The following article shall focus on telling you what the fuel line pipe is made of.
The automotive fuel pipe assembly maintenance methods are as follows:1. When disassembling the pipe quick connectors, double wrenches must be used to avoid damage and loosening the connection of other parts.2. Use a pump or compressed air to blow off the dirt inside the tube.3. It is usually possibl